CF Compressed Air Filters

    With a choice of seven filtration grades, you can design a filter system that delivers the air quality you need with the efficient performance you desire. Operation and maintenance are a breeze, and the long-lasting filter life and low pressure drop give you outstanding performance.

    Key Features

    • Low pressure drop delivers energy savings
    • Piston-type element to housing seal keeps unfiltered air from bypassing the element
    • Corrosion-resistant cores
    • With a large, effective surface area, the “Matrix-blended fiber” media improves capture rate and ensures high efficiency
    • Coated, closed-cell foam sleeve resists chemical corrosion from oils and acids 

    Grade 11 Moisture Separator

    • Bulk liquid removal. Maximum inlet liquid load: 30,000 ppm w/w
    • Filtration: Two stainless steel orifice tubes provide 10 micron mechanical separation

    Grade 9 Separator

    • mechanical for bulk liquid removal plus a 3 micron coalescer (5 ppm w/w maximum remaining oil content)
    • Two-stage filtration
      • First stage - two stainless steel orifice tubes provide 10 micron mechanical separation
      • Second stage - in-depth fiber media captures solid and liquid particles to 3 microns

    Grade 7 General Purpose Filter

    • For removal of liquid water and oil; removes solid particles to 1 micron (1.0 ppm w/w maximum remaining oil content) Corrosion resistant inner and outer cores
    • Two-stage filtration
      • First stage - captures larger particles with alternate layers of fiber media and media screen
      • Second stage - coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media

    Grade 6 Dry Particulate Filter

    • For removal of solid particles to 1 micron
    • Two-stage filtration
      • First stage - coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media
      • Second stage - captures larger particles with alternate layers of fiber media and media screen

    Grade 5 High Efficiency Oil Removal Filter

    • For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.008 ppm w/w maximum remaining oil content)
    • Corrosion resistant inner and outer cores
    • Two-stage filtration
      • First stage - multiple layers of fiber media and media screen remove larger particles, prefiltering the air for the second stage
      • Second stage - multiple layers of bonded, blended fiber media for fine coalescence
      • Outer coated, closed cell foam sleeve

    Grade 3 Ultra High Efficiency Oil Removal Filter

    • For coalescing ultra-fine oil aerosols; removes solid particles to 0.01 micron (0.0008 ppm w/w maximum remaining oil content)
    • Corrosion resistant inner and outer cores
    • Two-stage filtration
      • First stage - coated, closed cell foam sleeve acts as prefilter and flow disperser
      • Second stage - multiple layers of matrix blended fiber media for ultra-fine coalescence
      • Outer coated, closed cell foam sleeve

    Grade 1 Oil Vapor Removal Filter

    • For removal of oil and hydrocarbon vapors normally adsorbable by activated carbon; removes solid particles to 0.01 micron (0.003 ppm w/w maximum remaining oil content)
    • Corrosion resistant inner and outer cores
    • Two-stage filtration
      • First stage - a stabilized bed of finely divided carbon particles removes the majority of the oil vapor
      • Second stage - multiple layers of fiber media with bonded microfine carbon particles remove the remaining oil vapor
      • Multiple layers of fine media prevent particle migration
      • Outer coated, closed cell foam sleeve prevents fiber migration
      • Designed for 1000 hour life at rated conditions
    CRDS.png